OLED Display for Medical Equipment- 20*4 2.89'' PM OLED DG-O2004-289

Tags

Home / Products / Tags

OLED Display for Medical Equipment - Dianguang Hi Tech Electronics

OLED (Organic Light-Emitting Diode) display is a type of display technology that can be used in a variety of applications, including medical equipment. OLED displays have several advantages that make them well-suited for use in medical equipment.

One advantage of OLED displays is their high contrast ratio, which allows them to display deep blacks and bright whites. This can be especially useful in medical equipment, where clear and accurate display of images and data is critical.

OLED displays are also very thin and lightweight, which makes them easy to incorporate into portable medical equipment. They are also energy efficient, which can be important for devices that need to be used for long periods of time without access to a power source.

In addition, OLED displays have a wide viewing angle, which allows them to be easily viewed from different angles. This can be useful in situations where the display needs to be viewed by multiple people at the same time.

Overall, OLED displays are a good choice for medical equipment due to their high contrast ratio, thin and lightweight design, energy efficiency, and wide viewing angle.

 

We always think and practice as the environment changes and keep growing. Our goal is a richer mind, body and life for OLED Display for Medical Equipment,OLED Display for Smart Wearables,Serial TFT Display. We could solve our customer problems asap and do the profit for our customer. If you need good service and quality , pls choose us , thanks!The product will supply to all over the world, such as Brazil ,Philippines ,South Korea ,Malaysia ,India . Since our establishment, we keep on improving our products and customer service. Please feel free to contact us for more information. We hope to establish cooperative relationships with you in the near future. If you need more information, please do not hesitate to contact us via E-mail, fax or telephone.

OLED Display for Medical Equipment

 

2.89 INCH PM OLED

20*4 2.89'' PM OLED DG-O2004-289

DG-O2004-289 is a 2.89 inch size PMOLED with 20 characters * 4 line. It is designed to 3 interface mode: 4/8-bit 6800, 8080 parallel, 3/4 wires SPI or I2C Interface, which can be easily assembled and communicated by 16 pin. The available display color are yellow and white.

128*64 2.7 INCH OLED DG-12864-027

128*64 2.7'' OLED DG-O12864-027

DG-O12864-027 is a 2.7 inch PMOLED with 128*64 dot matrix. It is driven by SSD 1325 driver IC which can be communicated by 8-bit 68xx/80xx Parallel or 4 wire SPI interface.

2.70 INCH PM OLED

128*64 2.7'' PM OLED DG-027Q02

As one of our best selling OLED display, DG-027Q02 is built in 2.7 inch diagonal size panel with 128*64 dot matrix. It is designed with 8-bit Parallel 6800 or 8080 / 4-SPI / I2C interface, SSD 1309ZC, and 31 pin FPC to dispaly monochrome (white, yellow/green) te

2.40 INCH PM OLED

128*64 2.42'' PM OLED DG-O12864B-0242

DG-O12864B-0242 2.42 Inch PM OLED 128*64 is a product derived from DG-O12864A-0154. DG-O12864B-0242 comes with a bigger disgonal size (2.42 inch), dot pitch (0.43*0.43mm), and dot size (0.4*0.4mm). It share the same resolution (128*64) and 3 interfaces (8 bit 6800/8080, SPI or I2C) with DG-O12864A-0154.

128*32 2.23

128*32 2.23" PMOLED DG-O12832-223B

DG-O12832-223B is our disgonal 2.23 inch PMOLED built in 128*32 dot arrangement. It equipped with 8-BIT 6800/8080 Parallel,4-wire SPI, or I2C interface and driven with 1/64 duty by SSD1305 IC. It is capable of being operated from -30 to 85 ℃ and stored from -40 to 90 ℃. 

2.23 INCH PM OLED

128*32 2.23'' PM OLED DG-O12832-223A

DG-O12832-223A is a PMOLED built in 2,23 inch disgonal size and 128*32 dot arrangement. As an upgrade version of our DG-O12832-223B PMOLED display, DG-O12832-223A is built in smaller size (66.5L×35.0W×8.8H mm) and equipped with more advanced SSD1309 driver IC.

1.54 INCH PM OLED

128*64 1.54'' PM OLED DG-O12864A-0154

Our DG-O12864A-0154 is a 1.54 inch disgonal OLED display with 128*64 dot arrangement. It is built in 8 bits parallel, SPI or I2C interface, SSD1309Z driving IC, and 24 pin FPC connector to generate best-quality image and text. High operating and storage temperature range (-40 - 80°C) allows it to be able to work in any normal environment.

0.91 INCH PM OLED

96*16 0.84'' PM OLED DG-O9616-084

Our DG-O9616-084 product is a diagonal 0.84 inch PMOLED with 96*16 dot arrangement. High (2000:1) contrast ratio and 120 nits brightness make the white/blue text extremely clear and bright enough in dark situation. It support I2C IIC interface and communicated by 14 pin FPC connector.

OLED Display for Medical Equipment

Quick Find

———

*

*

*

*

Contact Us
  • E-mail: dghitech@dght-oledlcd.com
  • Mobile: +86 131 4302 1213
  • Tel.: +86 311 8383 4616
  • Add.: A-312, Software Building, Golden Stone Industrial Park, No. 368 Xinshi North Road, Shijiazhuang
ORDER NOW!
Chat with Us